The last thing you want is your CCELL cartridge malfunctioning when you need it most. Unfortunately, many CBD users encounter this issue at the worst possible time. But don’t worry—most ccell vape carts problems are easy to resolve with the right tips. The first step is to identify the root cause of the issue.
If your CCELL cartridge isn’t working, the issue could be anything from a poor battery connection to a clogged cartridge. To troubleshoot, check the connection between the cartridge and battery, and ensure both are clean and properly aligned. If you suspect a clog, gently clean the cartridge using rubbing alcohol or apply heat to loosen any thickened oil. For battery issues, try testing the cartridge with another battery to rule out any power problems.
In this post, we’ve covered everything you need to know to get your vape firing perfectly once again and every day.
6 Common Reasons Why Your Cart Won’t Hit
1-Poor battery connection
This is one of the common reasons why your CCELL cartridge might not be working. If your 510 battery is not properly connected to the connection plate of the cartridge, it can result in no or poor contact. The connection plate is designed to move up and down, a mechanism that allows for the accommodation of different cartridges screwed on at different depths.
Loss of contact often happens when the battery is pushed way too far into the base of the cartridge. If the battery is over-tightened when screwed on the vape cartridge, the connection plate will be pushed down and can easily lead to a loss in the link.
2-Clogged cartridge
Your vaping device is prone to build-up that can clog different components, including the cartridge. When the CBD cartridge becomes clogged or coated where the battery makes contact, it interferes with the connectivity. Your battery won’t be able to supply the power to produce vapor. Please note that even the smallest amount of debris or wax can cause connectivity issues.
A clog may happen when you have some leaks or your device sits too long unused. It will be more likely to occur when the type of product you use has a high viscosity level. The risk increases during the colder days because the CBD oil becomes thicker. Another reason a ccell cart clogged is that the cartridge is used many times, the cotton around the ceramic core is clogged.
3-Burnt out cartridge coil
If your vape tastes burnt, that’s an indication of a burnt coil. This often happens when the power output needed to heat the coil goes out of the recommended range. The cartridge coil can also burn out, especially if it’s defective or it has seen a lot of continuous use.
4-Resistance of cartridge
Making the wrong voltage adjustments on your vape device can be a source of trouble. When an atomizer has more resistance, less power will pass through from the battery to the tip of the tank. Decreasing resistance means the current and power will increase. Well, the cartridge is more likely to break when you apply too much power for too long while your resistance level is too low.
5-Battery not charged or damaged
You may think the problem lies within your cartridge but perhaps it’s your battery that isn’t working if your cart has airflow but no smoke. Your cartridge won’t heat up at all if the battery has no charge. If you have been using rapid chargers instead of the recommended charger, then your battery is probably damaged. Rapid chargers or tablet chargers tend to put out too much power, which risks ruining a battery.
6-Exposure to extreme temperature and weather
Leaving your vape cartridge exposed to very hot and humid temperatures can make it to malfunction in some way. If it’s too hot, it can affect the internal infrastructure. When the temperature drops too low, the vape juice can freeze. Pulling it becomes difficult.
Just try keeping syrup in the freezer instead of leaving it out at room temperature. You will notice its viscosity changes. The syrup becomes thicker and slower to pour. Well, the same goes for your vape cartridge.
How to Solve These CCELL Cartridge Issues
1-Fixing cartridge to battery connection issues
When the battery is screwed onto the cartridge too tightly, you can use a paper clip, razor blade, or pocket knife to gently pull the connection plate back up until it is level. If this doesn’t work, make sure you check the connection plate on your CBD cartridge and try the same trick.
*If you think you are facing a battery issue, test your cartridge with another 510 battery. If the cart works well, then your battery has an issue; if your cartridge still does not work, then that may be a cartridge issue.
2-Fixing a clogged cartridge
One trick to unclog your cartridge is to manually dislodge whatever is clogging it. You’ll need a cotton bud or damp piece of cloth and some rubbing alcohol to wipe clean all the wires exposed and the connection points. Nevertheless, you need to check and ensure alcohol is allowed for your vaping device.
Alternatively, you can use heat, especially when the viscosity of your oil has changed to too thick. A lighter or hairdryer will do the trick. If you’re going to use a lighter, you’ll need to hold it up to the clogged part of the CCELL.
But if you opt for a hairdryer, blast the vape cartridge from a few feet away. This way, the heat levels will increase gently and evenly inside the cartridge and unclog it.
Related Reading: How to Fix a Clogged Vape Cartridge
3-Fixing CBD vape cartridge battery issues
If your vape device is showing red flashes of light, then the battery is out of power. It’s important to charge it fully before testing it on the device. In case you’re using batteries with a button, you will have to hold the button down while you draw.
Sometimes your battery terminal can be clean but does not transfer power back to the cartridge even after you’ve adjusted the connection plate inside the 510 thread. It’s more likely that the battery is damaged. If you have an extra battery, use it and see whether it solves the problem.
When buying a new 510 battery, make sure you pick the correct voltage that matches what the cartridge manufacturer recommends.
4-Fixing a burnt cartridge coil
The best course of action is to replace your cartridge coil. A burnt cartridge can not be used anymore since the cotton-wrapped heating element is burnt as well. That will produce harmful vapor and that is why we suggest you replace with a new cartridge.
But remember the new coils can burn out too if you use a battery that gives too much voltage. So you have to fix that first.
5-Determining safe resistance cartridge levels
You should learn how to use the Ohms law to stay within safe power and resistance limits. Also, the manufacturers have rated their vape batteries with specific resistance levels. So, be sure to check out the capabilities and limitations of your batteries, especially the discharge rate.
Generally, it’s safe to use batteries that have the highest discharge rate with high resistance coils. Please keep in mind that this will affect the amount of vapor produced as well as its flavor. The best way to go about finding the sweet spot is by starting low and working your way up. You will find the spot even before reaching the dangerously high power settings.
6-Protecting your cartridge from harsh temperature and weather
If your cartridge has pulling issues because of the freezing temperatures, just place it in a plastic bag and then place it in warm water for a few minutes to warm up the oil inside. And to avoid having to deal with this and other weather element issues, be sure to keep your vape device in a lanyard or holder at all times.
We hope this helps fix your CCELL cartridges problems. If you can not fix your vape cartridges, you may ask for help from the shop.
FAQs About CCELL Cartridges
1. Why is my CCELL battery blinking 10 times?
This usually indicates a connection issue or a low charge. Check for debris on the connection points and clean them. If the problem persists, charge your battery fully or try another cartridge.
2. Why does my cartridge have airflow but no smoke?
This often means the battery isn’t heating the cartridge. Ensure the battery is charged and properly connected. If the cartridge still doesn’t work, it may have a burnt coil or other internal damage.
3. How do I prevent my cartridge from clogging?
- Store your vape upright.
- Avoid leaving it unused for long periods.
- Use a hair dryer to soften thick oil before use.
4. Can I fix a burnt coil?
No, burnt coils cannot be repaired. Replace the cartridge and adjust your battery settings to prevent overheating.
5. How do I choose the right 510 battery?
Select a battery with adjustable voltage and ensure it matches the manufacturer’s recommendations for your cartridge.
Final Thoughts
A non-functioning CCELL cartridge can be frustrating, but with the right troubleshooting steps, you can often get back to vaping quickly. By identifying common issues such as battery connection problems, clogs, or coil damage, and applying simple fixes, you can ensure a smooth vaping experience. Remember to handle your device with care, keep it clean, and avoid exposure to extreme temperatures.
If these solutions don’t work, consider reaching out to your retailer or manufacturer for further assistance. Keeping these tips in mind will help you enjoy your vape without interruptions.
Happy vaping!
